An airless paint sprayer is a great tool for painting projects, but it needs to be properly cleaned and maintained in order to keep it in good working condition. Cleaning an airless paint sprayer is not difficult, but it does require some special steps.

Here are the steps you should take to properly clean your airless paint sprayer:

1. Start by disconnecting the power source from the airless paint sprayer and removing any remaining paint from the airless spray nozzle. This can be done with a brush or a cloth.

2. Once all of the paint has been removed, fill the reservoir with warm water and add a few drops of dish soap. This will help break down any remaining paint residue and make it easier to remove.

3. Turn on the power source and run the pump for several minutes to circulate the soapy water through the system. This will help loosen any remaining residue that may have built up in the lines or filters.

4. After running for several minutes, turn off the power source and allow the soapy water to sit in the reservoir for 10-15 minutes before draining it out completely.

5. Once all of the soapy water has been drained out, refill the reservoir with clean water and run it through again for several minutes to flush out any remaining residue or soap suds that may still be present in the system.

6. Finally, turn off the power source once again and allow all of the water to drain out completely before storing your airless paint sprayer away until you need it again!

Following these steps will ensure that your airless paint sprayer is properly cleaned and ready for use when you need it next time!